Are you a crafty type?

Discussion in 'Off-Topic Discussion' started by Melinda, Jul 4, 2011.

  1. pete

    pete Growing a bit of this and a bit of that....

    Joined:
    Jan 9, 2005
    Messages:
    51,911
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Mid Kent
    Ratings:
    +96,735
    They look like indoor furniture.:scratch:

    If so I give them a couple of months before the legs fall off,:WINK1: if left outside in the rain.:)

    Chipboard and outside dont mix.
     
  2. Melinda

    Melinda Gardener

    Joined:
    May 28, 2010
    Messages:
    1,004
    Location:
    Lahndan Tahn
    Ratings:
    +437
    I certainly wouldnt have them in the house Pete! :D

    This is just a fun summer project, I wasnt planning on them lasting forever!

    I'll protect it as best I can with suitable outdoor paints and grouts.
    If the legs fall off, so be it! I'll wall mount the mosaic on a garden wall! :D
     
  3. pete

    pete Growing a bit of this and a bit of that....

    Joined:
    Jan 9, 2005
    Messages:
    51,911
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Mid Kent
    Ratings:
    +96,735
    Oh, ok just thought it was a lot of effort to go to for something that wont last very long.
     
  4. kyleleonard

    kyleleonard Total Gardener

    Joined:
    May 23, 2011
    Messages:
    1,428
    Gender:
    Male
    Location:
    Ashton-under-Lyne
    Ratings:
    +950
    Can you buy protective sheeting which you could staple to the legs?
     
  5. daitheplant

    daitheplant Total Gardener

    Joined:
    Dec 19, 2006
    Messages:
    10,282
    Gender:
    Male
    Occupation:
    Retired
    Location:
    South East Wales
    Ratings:
    +2,881
    Melinda, the obvious thing would be to break up, and use, the tiles you are taking off.:D:dbgrtmb:
     
  6. Melinda

    Melinda Gardener

    Joined:
    May 28, 2010
    Messages:
    1,004
    Location:
    Lahndan Tahn
    Ratings:
    +437
    Dai- I thought that!

    Broken up into small pieces and cobbled back together again, the textured brown tiles could actually look like a tree trunk?

    I might manage a picture of some kind after all.
     
  7. Melinda

    Melinda Gardener

    Joined:
    May 28, 2010
    Messages:
    1,004
    Location:
    Lahndan Tahn
    Ratings:
    +437
    Plastic sheeting to wrap around the legs you mean?

    I was thinking of sealing the joints with silicone and using marine/ waterproof paints to protect the legs.

    Or even using strips of angle beading/ mesh- the sort used underneath render- staple it on, cover with adhesive and mosaic over the lot!


    My schedule is insane atm, this will be something relaxing.
     
    • Like Like x 1
    • kyleleonard

      kyleleonard Total Gardener

      Joined:
      May 23, 2011
      Messages:
      1,428
      Gender:
      Male
      Location:
      Ashton-under-Lyne
      Ratings:
      +950
      Staples to keep it in tact!

      And metal mesh is really hard to cut, especially to the width of a table leg.. normally I get cut about 100 times whenever I use it!

      If you want a cheap solution to stick the mesh on, though, I'd use plasterboard adhesive (PVA first) which is £5 a bag and it dries like metal, so I'd cover all the mesh with it and then once it's dried (few hours) you can mosaic/paint over it and it'll be like a metal pole! Or use clout nails to stick it on, but the mesh would more than likely come away.
       
      • Like Like x 1
      • JWK

        JWK Gardener Staff Member

        Joined:
        Jun 3, 2008
        Messages:
        32,807
        Gender:
        Male
        Location:
        Surrey
        Ratings:
        +51,000
        Well I admire your ideas Melinda, kind of like a subtle gaudi mosaic. I wonder if your chipboard might last a bit longer going by my experience. I've had some sheets of chipboard left outside for over 4 years now, some I've used to shore up raised beds in my veg patch which I expected to turn to mush, but they haven't. They warp a bit and soak up water like a sponge so they get very heavy to lug around. Not the same as a table I know but your silicon idea might just work. Actually all you are doing is using the old table as a mold, use enough silicon, tiles and adhesive and you'll be able to discard the chipboard bits when they turn into mushy cardboard. :dbgrtmb:
         
        • Like Like x 1
        • watergarden

          watergarden have left the forum because...i'm a sad case

          Joined:
          Jan 14, 2007
          Messages:
          946
          Ratings:
          +549
          Since a mosaic is wanted, would it not have been quicker to leave the tiles in situ, and then hit them with a hammer. (Instant mosaic)

          But on a more constructive note, what about the underside of the chipboard, that will need something to protect it.

          How about applying bees wax?

          Other suppliers of bees wax are available
           
          • Like Like x 2
          • Melinda

            Melinda Gardener

            Joined:
            May 28, 2010
            Messages:
            1,004
            Location:
            Lahndan Tahn
            Ratings:
            +437
            Watergarden, your post just CREASED me up! :D

            (It may be because Ive just my backside completely kicked in a particularly brutal training session!) Lets hear it for endorphins! :D

            Ok- Im off to work!

            Cheers John- as ever, and Kyle too. I';ll reply when I get into the office!
             
          • Daisies

            Daisies Total Gardener

            Joined:
            May 26, 2005
            Messages:
            9,335
            Gender:
            Female
            Ratings:
            +2,686
            Watergarden, you are incorrigible!
             
          Loading...

          Share This Page

          1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
            By continuing to use this site, you are consenting to our use of cookies.
            Dismiss Notice