Help needed with my greenhouse please!!!!

Hello
I had my greenhouse taken down last summer by two men whom landscaped my garden . The intention was that it was going to put back up by them but in my mums garden. Anyway roll on six months or so and we have come to put it up and it doesn't seem to have enough parts to it. We have two sides and two other parts and also a part separate. I have attached photos . I would be so grateful if someone could tell me how it goes together if at all possible! And if anyone knows possibly what make it is so I can look up instructions online. Many thanks Lucy

 

Hi,

So many makers of greenhouses and all so very similar, but the two things that stand out about yours are the size of the middle glass in the doors being so much smaller that the top and bottom ones and on that same door end section the X - Star shaped struts either side of the doors.

To me it looks as if it could be a Rhino model, though Eden and Elite are quiet similar.

Assume your model is a good few years old so may not look quiet the same as the current model.

You could send the pics of that door end frame to the main makers and see if they can help .

Hopefully you do have all the bits there, though as you have found it can be so confusing what goes where, even with the instructions !

Found some instructions which might prove useful

http://www.igcusa.com/catalogs/Rhino-8x12-US-Assembly-Instructions.pdf

 

Ricky101 you are a star! Thank you so much yes I think that is my one ! Thank you again