Trellis cost

Discussion in 'General Gardening Discussion' started by Loofah, Aug 19, 2008.

  1. Loofah

    Loofah Admin Staff Member

    Joined:
    Feb 20, 2008
    Messages:
    14,605
    Gender:
    Male
    Location:
    Guildford
    Ratings:
    +25,607
    I'm about to divide my garden, two thirds to lawn and the back third to raised beds. The divider, I've decided, will be concave trellis with a few plants etc and an archway to walk through in the middle... mmm very nice I hear you say, and rightly so;) But I looked at trellis prices and was amazed! Maybe I'm just a tight wad but just 2 panels (6'x5') with 4 posts came out to around 70 quid and that's without adding the archway yet; if there's anyone in the trade can you tell me what I should be expecting or did I get a reasonable quote that I should be happy with?
     
  2. wiseowl

    wiseowl Admin Staff Member

    Joined:
    Oct 29, 2006
    Messages:
    45,214
    Gender:
    Male
    Occupation:
    Philosophy of people
    Location:
    Flying Free As A Bird over North Kent Marshes
    Ratings:
    +92,965
    Hi Loofah I always make my own,A pack of pressure treated Battoning
    what ever size you Prefer (32mm x19mm) or larger,A pack of 8x 6ft in length I get at Wickes Store Usually cost me about £6-£7 for a 6 x 6 trellis easy enough to make and a lot stronger to using either Nails or (Screws which I tend to use) and you can make them what ever size you need,The squares can be the size that you want,just cut a piece of batton as a Template and use this for all your squares.Hope this is of some help:)
     
  3. Loofah

    Loofah Admin Staff Member

    Joined:
    Feb 20, 2008
    Messages:
    14,605
    Gender:
    Male
    Location:
    Guildford
    Ratings:
    +25,607
    Certainly not a bad idea! I'm liking the chance to have it the exact dimensions but would struggle a bit with getting a concave top (if it was just squared off it would 'look right'). Definitely something to ponder...
     
  4. tweaky

    tweaky Gardener

    Joined:
    Jun 7, 2008
    Messages:
    1,991
    Ratings:
    +3
    I find the cost's of trellis or most other kinds of fencing exorbitant.

    If you can do a bit of diy, then I too would recommend Wicks....use the web site, they deliver free as well if you spend over £50.:thumb:

    One word of warning....you do need to check the wood as sometimes, some of it is not up to scratch...but up to now I haven't had any problems with them.:thumb:
     
  5. wiseowl

    wiseowl Admin Staff Member

    Joined:
    Oct 29, 2006
    Messages:
    45,214
    Gender:
    Male
    Occupation:
    Philosophy of people
    Location:
    Flying Free As A Bird over North Kent Marshes
    Ratings:
    +92,965
    Hi Loofah If its the concave you are worried about and you need some measurements take your Pecil and paper and a Tape ,go to your D I Y local store and measure a concave Panel there ,then just Copy it,and you will see how they have constructed it as wellThey won,t mind:D,I do it all the time If its something new to me,Just a thought.:thumb::)
     
  6. tweaky

    tweaky Gardener

    Joined:
    Jun 7, 2008
    Messages:
    1,991
    Ratings:
    +3
    There are several ways of achieving concave. However, you need to plan well in advance and require space and several cramps....in the trade the usually bend wood strips by steaming.

    You can do it laboriously by hand by saw cuts, but its not easy. As an alternative, you can purchase a panel of exterior ply or similar...and then jig saw patterns out of the wood...then treat it...but they all take time.

    Mind you, if you have a place to do this, as do it over the winter months when you have nothing else to do, it can be tremendously satisfying.
     
  7. wiseowl

    wiseowl Admin Staff Member

    Joined:
    Oct 29, 2006
    Messages:
    45,214
    Gender:
    Male
    Occupation:
    Philosophy of people
    Location:
    Flying Free As A Bird over North Kent Marshes
    Ratings:
    +92,965
    Hi Loofa I usually use Treated feather edge strips cut in half then double up for the concave ,they bend nicely on the trellis.:):thumb:
     
  8. youngdaisydee

    youngdaisydee Gardener

    Joined:
    Aug 23, 2007
    Messages:
    3,922
    Location:
    Newcastle upon tyne
    Ratings:
    +5
    It Looks Great Bobj, And a Lot Cheaper, My hub made our first trellis Fence out of Roofers Latts, :thumb:
     
  9. youngdaisydee

    youngdaisydee Gardener

    Joined:
    Aug 23, 2007
    Messages:
    3,922
    Location:
    Newcastle upon tyne
    Ratings:
    +5
    15 omg..Just want to say yours is better :)
     
  10. plantlife

    plantlife Gardener

    Joined:
    Jun 4, 2008
    Messages:
    337
    Ratings:
    +0
  11. PeterS

    PeterS Total Gardener

    Joined:
    Mar 18, 2005
    Messages:
    6,662
    Gender:
    Male
    Occupation:
    Retired
    Location:
    N Yorks
    Ratings:
    +4,016
    Bobj - that really impressive. Loofah, my garden is rather the same. Front two thirds a gravel area, and the back one third a summerhouse, patio and raised beds.

    [​IMG]

    I bought an arch, but otherwise I just used some old timber I had of about 3" by 2". I put verticals in at about six foot intervals and laid pieces across the top. Screwed to each vertical was a small triangular trellis to give the plants something to grow up. The plants I used were Arbutilon megapodicum, Jasmine beesianum, Clematis montana (in flower - taking over!), another Clematis and a Wisteria (still very small). I have border plants growing in front, so you can hardly see through it now. I reasoned that once plants were climbing up you wouldn't be able to see the shape (or lack of shape) of the structure underneath.
     
  12. Helofadigger

    Helofadigger Gardener

    Joined:
    Jul 7, 2007
    Messages:
    3,571
    Ratings:
    +1
    Really beautiful Peter but then again I have a great fondness for the Montana.

    Give it a go Loofah you will be really chuffed with yourself once your trellis is finished and you never know it might just spur you onwards to make other charming things for your garden.Good luck and happy building.Hel.xxx.
     
  13. takemore02withit

    takemore02withit Gardener

    Joined:
    Apr 8, 2008
    Messages:
    2,695
    Ratings:
    +40
    That is stunning peter,a real eyecatcher.:thumb::D 02
     
  14. Pro Gard

    Pro Gard Gardener

    Joined:
    Sep 26, 2007
    Messages:
    3,325
    Ratings:
    +6
    woo, you use screws.... must take an age. I normally buy in trellis from the local sawmill but for non standard jobs then its a pack of roofing batten and a paslode nail gun.
     
  15. Loofah

    Loofah Admin Staff Member

    Joined:
    Feb 20, 2008
    Messages:
    14,605
    Gender:
    Male
    Location:
    Guildford
    Ratings:
    +25,607
    You know Wickes is probably my favourite DIY store? Just an aside... I shall start my plotting and planning!
    Have started to consider (as they're bespoke and I can do what I like if I'm making them) that instead of two trellis of equal height, having them slightly offset. It should make it slightly less formal in appearance:)
    A trip to Wickes this weekend!
     
Loading...

Share This Page

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice